Using a CO2 charger depends on the application, but here's a general guideline:

Soda Siphon:

• Fill the siphon bottle with chilled liquid, following the manufacturer's fill line.
• Screw the charger holder firmly onto the siphon head, ensuring a good seal.
• Insert a new CO2 charger into the holder, following the specific instructions for your siphon. Tighten it securely, but avoid over-tightening.
• Hold the siphon upright and press the lever to release the CO2 gas. The exact number of presses will depend on your desired level of carbonation (consult your siphon's instructions).
• Unscrew the charger holder and remove the spent charger. Never reuse a CO2 charger.

Inflating Equipment:

• Make sure your equipment has the appropriate valve for CO2 chargers and any necessary adapters.
• Consult your equipment's manual for specific instructions on using CO2 chargers for inflation.
• Generally, you'll screw the charger into the adapter and then connect the adapter to the valve on your equipment.
• Short bursts are recommended to avoid over-inflation. Check the pressure gauge on your equipment to monitor inflation.

Safety Tips:

• Never use a damaged or leaking CO2 charger.
• Keep CO2 chargers away from heat and direct sunlight.
• Do not puncture or tamper with a CO2 charger.
• Never point a CO2 charger at yourself or others.
• After use, dispose of CO2 chargers according to local regulations.