When it comes to fire safety and smoke control systems, there are four main regulations you need to be aware of. A suitably qualified installer should be used to fit smoke control and ventilation systems, and should be experienced in fire strategy verification, system design, installation and commissioning in accordance with the relevant industry standards. For air supply and extraction systems in fires, with or without jet fans, we have boxpark control panels to facilitate the integration of the ventilation system with the co and fire detection alarms. Voice alarm systems may be used both in closed spaces and in open space. The devices have been designed such that the emitted sound is loud, clear and audible from great distances.

In cases where the manufacturer recommends inspections more often than once a year, as stated in the regulation [1], these should be carried out at the frequency indicated by the manufacturer. Shut-off dampers in ventilation and air-conditioning systems are an important component of fire protection systems in buildings. This applies to all types of buildings (public buildings, residential buildings, production and storage halls, etc.) as well as sites such as tunnels, subways, stations, underground passageways, etc. Fumes and fire gases make it impossible to evacuate people from buildings due to flue gas poisoning. This applies to both garages and staircases (escape and rescue routes). Fire ventilation regulates the flow of air and fumes in such a way as to draw the fumes and gases to the outside as quickly as possible and facilitate evacuation.

Whether you are looking for an active or passive smoke management system, smoke guard california has many options for elevator and atrium solutions. With a variety of finishes and dimensions, smoke guard california provides smoke management options for new construction and remodels. Smoke containment curtains can be built right into a building’s design and therefore invisible when not in use. Fire curtains offer an energy efficient and productive option to replace or supplement traditional atrium smoke management system.

We offer a huge selection of sizes, colors, and types of smoke eaters that are designed to remove dust, allergens, bacteria, and odors from tobacco smoke (including cigarette smells, cigar odors, & hookah smoke). The specified exit access lengths are increased by 50% when the escape route is equipped with smoke exhaust devices activated automatically by the smoke detection system. Geze smoke and heat extraction solutions can also be networked into the knx and bacnet world of building management systems via interface modules. As a result, energy-efficient, sensor-controlled ventilation and a healthy indoor climate can be readily implemented as  can central monitoring of the windows. When correctly installed, smoke control systems should keep escape and access routes free of smoke, facilitate firefighting operations, reduce the risk of the fire developing further and protect the building’s jumta logi contents from smoke damage.

Due to the high  amounts of power smoke exhaust systems need, they require a standby power source in the event of a power outage caused by a fire. In order to design the most effective smoke and heat ventilation solution, it is important to consider a wide range of specific factors. Contact colt for a more comprehensive understanding of your system’s design requirements and make use of our free system design service. Both our heat reclaim and smoke removal systems are expertly installed by one of our highly experienced and skilled engineers.