As one of the important parts of the car, the clutch cover can not only effectively transmit part of the torque of the engine to the pressure plate, but also act as the support shell of the clutch to compress the spring and release the lever.

In order to meet the requirements of use, when designing the structure, the automobile clutch cover should meet the following requirements: First, it must have sufficient structural rigidity so as not to affect the overall working performance. This is done to increase the separation stroke during operation and reduce the lift of the platen. In severe cases, the friction surfaces cannot be completely separated. Second, in order to ensure the overall balance and stability of the clutch, the cover plate and flywheel should be kept in good neutrality during structural design. In addition, the diaphragm spring support of the cover should have high dimensional accuracy. Ventilation and heat dissipation, avoiding excessive surface temperature due to friction, and the use of the clutch in the car are all design considerations.

How to determine its size, how to choose materials? Generally, it needs to be based on the structural design requirements of the clutch. In the design, special attention should be paid to the stiffness, alignment, ventilation, and heat dissipation of the automobile clutch cover. Typically, the inner diameter of a car clutch cover is larger than the outer diameter of its friction linings, so other parts can be included. When selecting materials, mild steel plates with thicknesses of 2.5mm to 5mm are usually considered.

Taizhou Benwo Auto Parts Co., Ltd. A Clutch Cover Manufacturer and Release Bearing Manufacturer from China.