Foil backed rigid insulation rigid foam insulation boards panels are ideal for basements and other areas of your home where you need a high performance, superior thermal break and moisture barrier.

They are manufactured from a fire retardant expanded polystyrene core (FR-EPS) with pure aluminium foil directly laminated to both sides.
Repairing Cracks and Tears in the Slab

When you notice a crack in your concrete slab, the first instinct is to assume it's a serious problem that requires immediate repair. However, cracks are quite common in concrete and not always the cause of severe problems. If your concrete cracks are only narrow, you may be able to fill them with a simple patch, but larger and deeper cracks require more serious repairs.

If you want to fix the cracks yourself, look for a product that is specifically designed to fill small to medium-sized concrete cracks. This product will have a good bond to the concrete and will not move easily when your slab expands or contracts due to movement of the soil beneath it or shrinkage.

Some of these products are also suitable for repairing horizontal expansion joints in the slab, especially if they are located in high-traffic areas like garages, driveways or patios. The flexible elastomeric formula in these products makes them very resistant to damage and can help prevent your concrete from shifting or sliding due to temperature changes, movement of the soil and water penetration into the slab.

It is important to follow the directions for the product that you are using. Some products will have to be left to set up over a 24-hour period, while others will work much faster. It is also important to use the proper amount of the material so it will not drip or run when it sets up.

Before you can apply any crack-filling concrete, you need to clean the surface. This will remove any debris that got into the crack, such as dirt or loose concrete. In addition, make sure there are no oil or grease stains on the surface of the concrete.

After cleaning the concrete, prepare the surface for the patch by applying a sealant to the cracked area. You can use a clear concrete sealer or a heavy-duty polyurethane coating to protect the repair and keep water from penetrating through the cracks.

A concrete professional will be able to help you with this process. They will be able to fill in the cracks and provide a surface coat that will restore the original beauty of your concrete floor.
Repairing Cracks and Tears in the Foam

If you have a crack in your foam slab, it's time to call in a professional. There are several effective ways to repair it, including mudjacking or polyurethane expanding foam injection.

Concrete slabs are actually quite porous and are prone to cracking over time. This is because of the way the concrete is mixed and allowed to dry.

Most homeowners don't realize that when the concrete is mixed, water infiltrates into the mix. This causes the concrete to shrink, which pulls different areas of the slab against each other. This leads to wall cracks and foundation problems.

One way to prevent this is to recoat the entire slab with a clear concrete sealer or heavy-duty polyurethane coating. This will stop the moisture from causing more cracks and ensure that any repairs you make are strong enough to resist water penetration.

Another effective method is to use epoxy-based crack repair products. Epoxy is a low viscosity resin that is well-suited for repairing thin structural cracks.

These products come in a cartridge that requires a caulking gun to apply them. They also require that you follow the directions carefully and read them thoroughly to ensure a good result.

The best epoxy-based products will be formulated for specific applications and can bond to difficult surfaces such as Teflon and polyethylene. These types of adhesives can be purchased at most hardware or home improvement stores.

Aside from preventing water infiltration, these products can also help strengthen your concrete slab and reduce cracking. Some epoxy-based products also contain carbon fiber staples to reinforce the repair and prevent it from tearing.

If your cracks are wider than the diameter of a caulking gun, you may need to fill in the low spots with additional concrete patch material before you can complete the repair. The concrete patch will usually be thicker than the base of your crack. This is because it has to support the weight of the epoxy.

For a larger crack, you may need to purchase a tool called a crack chasing wheel. These are available at many hardware or home improvement stores for under $20.
Repairing Cracks and Tears in the Wall

Foil faced insulation is a great way to insulate your home because it is durable, fire resistant, and environmentally friendly. It is also easy to install and requires little maintenance. It will also keep your energy costs down and add value to your home.

It is important to choose the right type of insulation for your space, however. Foil backed insulation boards are available in many sizes and colors, so you can find one that will fit your needs perfectly. It is also helpful to find a company that can install the foam boards for you.

Before repairing your walls, make sure that they are free of any moisture or mildew. Moisture can lead to mold and rot, which can decrease your home's value or even cause structural failure.

If the crack is small, a quick fix may be all that's required. Apply a thin coat of drywall compound to the wall around the area (Image 3). Spread the compound out with the 12-inch knife, then sand lightly.

Then, cut a piece of drywall that matches the existing drywall thickness. Tape the edges and use a drywall screw to attach it to studs. Repeat this procedure for each crack or tear in the wall.

Once the patch is secure, sand it gently to blend it into the rest of the wall. You can also use an aerosol spray texture in a can to replicate a heavy plaster texture.

For larger cracks, you can use a putty knife to fill in the damage with spackle or drywall compound. Be sure to wait until the first layer dries before applying another layer, so it can set properly.

This will help prevent draughts and air leaks in your home, especially during the winter months. In addition, it will help improve your R-value, which is the amount of heat that is trapped inside your home.

It is also a good idea to seal the foil-faced insulation with a radiant barrier, which will stop heat from escaping. This will help prevent your wall from overheating, which can cause damage to the insulation board and can increase your heating and cooling costs.